The following points should be noted when identifying decorative panels:

First of all, we need to identify artificial panels and natural panels, artificial panels straight texture, regular, consistent color. And the natural decorative panel texture pattern natural variability, no rules.

Secondly, the appearance of the decorative panel is decorative. The material should be fine and even, the color is clear, the wood grain is beautiful, the texture of the matching board and the parquet should be arranged according to certain rules, the wood color is similar, and the parquet seam is nearly parallel to the edge of the board. Surface color should be consistent, surface scar free.

Veneer base and surface veneer quality is better. Base thickness moisture content to reach the national standard, whether to remove alkali treatment. The thickness of the surface veneer should meet the standard, not too thin, too thin will penetrate the bottom, change, affect the appearance.

The structure of the adhesive layer is stable, and there is no ungumming phenomenon. Veneer and base material must be tightly jointed, veneer and base material, the internal layers between the bubbling, delamination, degumming phenomenon. Can be used to pry the knife method to test the adhesive strength, with a sharp flat blade along the adhesive layer to pry, if the adhesive layer is destroyed, but the wood is intact, that the adhesive strength is poor.

Smell, if the irritating odor is strong, that formaldehyde release exceeds the standard, will seriously pollute the indoor environment, used indoors is more dangerous. We can ask the manufacturer for a test report to see if the product meets environmental standards.

Choose products produced by regular manufacturers that are covered with marks indicating the type, grade, and name of the manufacturer at the lower right corner of the backplane.